Description

• Universal Input range from 100~120V AC, 50-60Hz, Pf> 0.95
• Magnetic Dimmable DC Output: 24V, 2000mA (48W)
• Dimmable, Suitable for Leading Edge or Trailing Edge TRIAC dimmers
• Protection: Short-Circuit / Over Current / Over Voltage and Auto-recovery Mode
• Compact, lightweight plastic case.
• Lamps wired in parallel • Double Isolation for Safety
• Terminal ‘Press-Fit’ Connection (Input: N, L, Earth. Output: +24V, GND)
• Approvals: ETL US (UL), CE, TUV, RoHS
• -20C to +45C, full load, max case 70C, 20 to 95% RH NC
• Size: 4.83” L x 3.16” W x 1.30” H (122.8mm L x 79.4mm W x 33mm H)
• 2 year warranty
• Note: All Eversale dimmable drivers will dim from 100% to 5%, This correlates to 24V down to 0V virtually. Each LED has a Vf (Forward Voltage), Typically is 3V, and when the driver dims below this voltage, it will simply stop working. So dimming performance is a factor of the LED, not the driver.
• Note: Dimming performance optimal at greater than 50% load. i.e. 24W+ for a 48W driver.  So pick the right Eversale driver, 12W, 26W or 48W
• Note: Best Dimmers are 'Incandescent ONLY' i.e. Leviton 6631, followed by 'Incandescent / Halogen'.  Avoid 'Universal' unless Load is matched to Driver Capacity, i.e. avoid large driver with small load

Datasheets

Datasheet

Install Instructions